Accessories and Supplies

JRS accessories and sign supplies make working with signage easy. Whether using a reliable 1 1/2" suction cup to remove a sign panel, a clear plastic hanger to display a nameplate or our very own Sign Snap for changeable message frames, JRS has what you need!

Dual Lock

  • Adhesive backed.
  • Used for holding signs in Designer and Premier holders.
  • Allows for easy removal of names using a suction cup.
Part No. Size Description
99D-512 1/2" x 12" Dense side mounts to trough. Light side mounts to sign.

Velcro® (Hook and Loop)

  • Nylon - white.
  • Adhesive back.
Part No. Size Description
99H-000 1" x 75ft. roll Hook
99L-000 1" x 75ft. roll Loop
99H-012 1" x 12" roll Hook
99L-012 1" x 12" roll Loop

Sign Snap

Part No. Size Description
9SN-050 1/2" x 12" Includes both top, bottom and adhesive.

Suction Cups

Part No. Size Description
SUC-000 1-1/2" dia. Used for removing plates from holders.
SUC-175 1-3/4" dia. Metal hanger for hanging signs on windows.
SUC-150 1-1/2" dia. Easy grip suction cup allows for convenient removal of signage holders.

Plastic Hanger

  • Custom sizes are available by quotation.
Part No. Size Description
9P-110 3-1/2" long x 1-7/8" high x 2-1/8" wide Clear plastic hanger mounts over the top
of office partitions from 1-1/2" to 2" thick.
Signs can be mount with double-sided tape.

Wire Clips

  • Apply to the back of Designer and Design II frames which will be used on partitions.
Part No. Size Description
99W-350 3-1/2" For frames 6" and under.
99W-600 6" For frames 8" and under.

V-Clip And Cable

Part No. Size Description
99V-000 1" For mounting to T-Bar in suspended ceiling and over double frames.
9CB-000 12" Zinc-plated 1" looped-end cables. Holds up to 25 lbs.