Accessories and Supplies
JRS accessories and sign supplies make working with signage easy. Whether using a reliable 1 1/2″ suction cup to remove a sign panel, a clear plastic hanger to display a nameplate or our very own Sign Snap for changeable message frames, JRS has what you need!
Dual Lock
- Adhesive backed.
- Used for holding signs in Designer and Premier holders.
- Allows for easy removal of names using a suction cup.
| Part No. | Size | Description |
|---|---|---|
|
99D-512 |
1/2″ x 12″ |
Dense side mounts to trough. Light side mounts to sign. |
Velcro® (Hook and Loop)
- Nylon – white.
- Adhesive back.
| Part No. | Size | Description |
|---|---|---|
|
99H-000 |
1″ x 75ft. roll |
Hook |
|
99L-000 |
1″ x 75ft. roll |
Loop |
|
99H-012 |
1″ x 12″ roll |
Hook |
|
99L-012 |
1″ x 12″ roll |
Loop |
Sign Snap
| Part No. | Size | Description |
|---|---|---|
|
9SN-050 |
1/2″ x 12″ |
Includes both top, bottom and adhesive. |
Suction Cups
| Part No. | Size | Description |
|---|---|---|
|
SUC-000 |
1-1/2″ dia. |
Used for removing plates from holders. |
|
SUC-175 |
1-3/4″ dia. |
Metal hanger for hanging signs on windows. |
|
SUC-150 |
1-1/2″ dia. |
Easy grip suction cup allows for convenient removal of signage holders. |
Plastic Hanger
- Custom sizes are available by quotation.
| Part No. | Size | Description |
|---|---|---|
|
9P-110 |
3-1/2″ long x 1-7/8″ high x 2-1/8″ wide |
Clear plastic hanger mounts over the top
of office partitions from 1-1/2″ to 2″ thick.
Signs can be mount with double-sided tape. |
Wire Clips
- Apply to the back of Designer and Design II frames which will be used on partitions.
| Part No. | Size | Description |
|---|---|---|
|
99W-350 |
3-1/2″ |
For frames 6″ and under. |
|
99W-600 |
6″ |
For frames 8″ and under. |
V-Clip And Cable
| Part No. | Size | Description |
|---|---|---|
|
99V-000 |
1″ |
For mounting to T-Bar in suspended ceiling and over double frames. |
|
9CB-000 |
12″ |
Zinc-plated 1″ looped-end cables. Holds up to 25 lbs. |
