Cutters & Gravers
- 100% SOLID MICRO-GRAIN CARBIDE engraving cutters engineered for strength and wear-resistance
- Will not RUST, BEND or TWIST
- Shank CANNOT be damaged from Cutter Knob Set Screw
- High precision gauging and inspection of all cutters
- Provides the best possible cut, with minimum vibration and tool wear
- Cutters and diamond gravers for all popular engraving machines
- “Specialized” cutter requests welcomed
- “GOLD STANDARD” titanium nitride coating reduces heat build-up. Higher speeds and feeds, better and more engraving, fewer cutter changes. Reduced cutter deflection, 3-5 times normal edge life
- Resharpened “GOLD STANDARD” cutters outlast uncoated cutters 2-3 times
Solid Micro-Grain Carbide Cutters - Cutter Tip Chart (Engraved Letter Height)
Recommended cutter TIP for single stroke characters. Specify TIP size required using this chart.
- This chart, illustrates the most commonly used letter height and tip width selections for single stroke characters.
- Maximum stroke width for 1/8″ shank cutter is .125, for 11/64″ shank is .171 and for 1/4″ shank is .250.
CUTTER SHANK SIZE – 3 sizes CC1=1/8″ shank x 4-1/2″, CC2=11/64″ shank x 6-1/2″, CC3=1/4″ shank x 6-1/2″
| SHANK SIZE | FOR USE ON |
|---|---|
|
1/8″ X 4-1/2″ |
Dahlgren® System One®, Wizzard®, New Hermes® I-M, IL-II, ILK-II
|
|
11/64″ x 6-1/2″ |
Xenetech, Newing-Hall® (Domiteaux), Meistergram® (H-Square), New Hermes® ITX, ITF-II, ITK-II, GTX Universal and Computer engravers, Dahlgren® System One Burnishing attachments or chip remover
|
|
1/4″ x 6-1/2″ |
Xenetech, Newing-Hall® (Domiteaux), Meistergram® (H-Square), New Hermes® IRX-IV, IRX-KIV, Dahlgren® System One, System Two, 10, 300, 500, Mark 12
|
|
4 mm x 110 mm |
Scripta® ‘S’ Model, MC-2 Beveller
|
|
6 mm x160 mm |
Scripta® ‘G’ Model
|
|
1/8″ x 1″ |
Scott® SM 100, 300, 400, 500, Kantograph PM-3, PM-5
|