A matte product line specially designed by Rowmark to comply with the Americans with Disabilities Act (ADA) Federal regulations. Braille-engravable, routable sheets come in a wide variety of color combinations.
| SPECIFICATIONS | |
|---|---|
|
Material: |
Single ply modified acrylic
|
|
Finish: |
Matte non-glare
|
|
Sheet Size: |
24" x 48 3/4" (600mm x 1220mm)
|
|
Thickness |
1-Ply: 1/32" (.8mm), .040" (1.0mm) 1-Ply: 1/16" (1.6mm) 1-Ply: 1/8" (3.2mm) |
|
Usage: |
Interior signage Exterior signage |
|
Engraving Methods: |
Laser Rotating carbide |
|
Cutting Depth: |
1/4" round .020" tip at 20-25 degree angle.
|
311-601 1/32" 321-601 1/16" 341-601 1/8"
311-602 1/32" 321-602 1/16" 341-602 1/8"
311-823 1/32" 321-823 1/16" 341-823 1/8"
311-603 1/32" 321-603 1/16" 341-603 1/8"
311-701 1/32" 321-701 1/16" 341-701 1/8"
311-901 1/32" 321-901 1/16" 341-901 1/8"
311-902 1/32" 321-902 1/16" 341-902 1/8"
311-902 1/32" 321-902 1/16" 341-902 1/8"
311-903 1/32" 321-903 1/16" 341-903 1/8"
311-509 1/32" 321-509 1/16" 341-509 1/8"
311-501 1/32" 321-501 1/16" 341-501 1/8" 351-501 1/4"
311-506 1/32" 321-506 1/16" 341-506 1/8"
311-571 1/32" 321-571 1/16" 341-571 1/8"
311-521 1/32" 321-521 1/16" 341-521 1/8"
311-302 1/32" 321-302 1/16" 341-302 1/8"
311-321 1/32" 321-321 1/16" 341-321 1/8"
311-502 1/32" 321-502 1/16" 341-502 1/8"
311-504 1/32" 321-504 1/16" 341-504 1/8"
311-581 1/32" 321-581 1/16" 341-581 1/8"
311-801 1/32" 321-801 1/16" 341-801 1/8"
311-808 1/32" 321-808 1/16" 341-808 1/8"
311-214 1/32" 321-214 1/16" 341-214 1/8"
311-811 1/32" 321-811 1/16" 341-811 1/8"
311-218 1/32" 321-218 1/16" 341-218 1/8"
311-201 1/32" 391-201 1mm 321-201 1/16" 341-201 1/8"
311-204 1/32" 391-204 1mm 321-204 1/16" 341-204 1/8" 351-204 1/4"
311-305 1/32" 321-305 1/16" 341-305 1/8"
311-306 1/32" 321-306 1/16" 341-306 1/8"
311-595 1/32" 321-595 1/16" 341-595 1/8"
311-331 1/32" 321-331 1/16" 341-331 1/8"
311-301 1/32" 321-301 1/16" 341-301 1/8"
311-308 1/32" 321-308 1/16" 341-308 1/8"
311-307 1/32" 321-307 1/16" 341-307 1/8"
311-413 1/32" 321-413 1/16" 341-413 1/8"
311-831 1/32" 321-831 1/16" 341-831 1/8"
311-851 1/32" 321-851 1/16" 341-851 1/8"
311-805 1/32" 321-805 1/16" 341-805 1/8"
311-806 1/32" 321-806 1/16" 341-806 1/8"
311-802 1/32" 321-802 1/16" 341-802 1/8"
311-821 1/32" 321-821 1/16" 341-821 1/8"
311-803 1/32" 321-803 1/16" 341-803 1/8"
311-401 1/32" 391-401 1mm 321-401 1/16" 341-401 1/8" 351-401 1/4"
311-891 1/32" 321-891 1/16" 341-891 1/8"
311-871 1/32" 321-871 1/16" 341-871 1/8"
311-771 1/32" 321-771 1/16" 341-771 1/8"
311-304 1/32" 321-304 1/16" 341-304 1/8"
311-398 1/32" 321-398 1/16" 341-398 1/8"
311-101 1/32" 322-101 1/16" 342-101 1/8"
| Physical Properties | Typical Values | ASTM Method |
|---|---|---|
Coefficient of Thermal Expansion |
||
|
Inch/°F |
5.6 x 10-5 |
D-696
|
Deflection Temperature |
||
|
Temperature at which material deflects .10" (.254mm) at 264 psi |
175°F (79.44°C) |
D-648
|
Flexural Strength |
||
|
Loan to stretch outer surface 5% |
10,300 psi |
D-790
|
IZOD Impact Strength |
||
|
Notched at 73°F (22.78°C) |
1.10 ft lbs/in |
D-256
|
Rockwell Hardness |
||
|
|
M45 |
D-785
|
Specific Gravity |
||
|
|
1.15 |
D-792
|
Tensile Strength |
||
|
To break |
5,500 psi |
D-638
|
|
Elongation before break |
50% |
D-638
|
Vicat Softening Point |
||
|
Temperature for needle to penetrate 1mm (90°F/hr, 2.2lbs) |
208°F (97.78°) |
D-1525
|
|
Temperature for needle to penetrate 1mm (90°F/hr, 11.0lbs) |
187°F (86.11°) |
D-1525
|