ColorCast Acrylics
Your signage will really stand out with the new ColorCast Acrylics. They are harder and clearer than extruded acrylics, and they allow you to perform fine, detailed laser and rotary engraving.
| SPECIFICATIONS | |
|---|---|
|
Material: |
Cell cast acrylic
|
|
Finish: |
Matte non-glare
Gloss |
|
Sheet Size: |
24" x 48" (610mm x 1219mm) +0, -.250"
|
|
Thickness |
2-Ply: 1/8" (3.0mm) .236" (6.0mm)
|
|
Usage: |
Interior signage Exterior signage |
|
Engraving Methods: |
Laser Router Rotating carbide |
|
Cutting Depth: |
.003" (.08mm)
|
CC342-600M 1/8" CC342-600G 1/8" CC352-600M 1/4" CC352-600G 1/4"
CC342-500M 1/8" CC342-500G 1/8" CC352-500M 1/4" CC352-500G 1/4"
CC342-550M 1/8" CC342-550G 1/8" CC352-550M 1/4" CC352-550G 1/4"
CC342-850M 1/8" CC342-850G 1/8" CC352-850M 1/4" CC352-850G 1/4"
CC342-200M 1/8" CC342-200G 1/8" CC352-200M 1/4" CC352-200G 1/4"
CC342-300M 1/8" CC342-300G 1/8" CC352-300M 1/4" CC352-300G 1/4"
CC342-400M 1/8" CC342-400G 1/8" CC352-400M 1/4" CC352-400G 1/4"
CC342-710M 1/8" CC342-710G 1/8" CC352-710M 1/4" CC352-710G 1/4"
CC342-330M 1/8" CC342-330G 1/8" CC352-330M 1/4" CC352-330G 1/4"
CC342-100M
1-ply 1/8"
CC342-100G
1-ply 1/8"
CC352-100M
1-ply 1/4"
CC352-100G
1-ply 1/4"
| Physical Properties | Typical Values | ASTM Method |
|---|---|---|
Coefficient of Thermal Expansion |
||
|
Inch/inch/°F |
|
D-696
|
Deflection Temperature |
||
|
Temperature at which material deflects .010" (.254mm) at 264 psi |
|
D-648
|
Flexural Strength |
||
|
Loan to stretch outer surface 5% |
|
D-790
|
IZOD Impact Strength |
||
|
Notched at 73°F (22.777°C) |
|
D-256
|
|
Notched at 32°F (0°C) |
|
D-256
|
|
Notched at 0°F (°C) |
|
D-256
|
|
Unnotched at 73°F (22.755°C) |
|
D-256
|
Rockwell Hardness |
||
|
|
|
D-785
|
Specific Gravity |
||
|
|
|
D-792
|
Tensile Strength |
||
|
To break |
|
To break |
|
Elongation before break |
|
D-638
|